kent Morse paddleHope you all had a very pleasant Christmas! Just before the holiday started I’ve made up my mind: I’ll attend for the Morse code exam in Belgium on 28th of June 2016! After reading the announcement on HamNieuws (Dutch) I was convinced this is the right motivator to finally get my code up to speed.
Since dropping the Morse code requirement in The Netherlands it is not possible to take exams in Morse code anymore. Which is a bit weird since in some European countries (i.e. France, Luxembourg) it is still required to have passed your Morse code exam to operate CW on the HF-bands. The only way to get the official note “CW included” on your license (or registration as it’s called these days) is to follow the “Belgium route”. There are still Morse code exams in Belgium. And because Belgium and The Netherlands both have implemented CEPT recommendations TR61/01 & 02, a valid pass of a Morse exam in Belgium is also valid in The Netherlands. So if you send your Belgium certificate to Agentschap Telecom (the Dutch FCC) they will (or have to) update your license with the note “CW included”.
It’s a bit of a stretch, but it’s the only way at this moment.

So I’ve picked up Morse code training at lcwo.net again. Every night one hour of studying. Also I listen to code created with text2cw on my daily commute. I still need to create something to practice my tapping skills. Thinking of building K3NG’s Arduino CW Keyer. I understand from the web-page I can build this keyer with LCD-display and be able to see what I tap. There must be a Arduino Nano laying around and a 2×16 LCD-display is in my junk-box. I’ll try something on a breadboard first. Will post here on any progress!

Best wishes for 2016!

Leave a Reply