Posted on
by

PhilipsElectronicaDoosAs a small boy I seemed talented for working with electronics. My parents encourage this by buying me a Philips Electronics Box. I really loved it and build all circuits there were to build. Not long after that I got my first solder iron and start building little kits I bought of my allowance.
After all these years I always owned a solder iron but used it maybe once a year or so. These last months I’m really working hard on CW-practice. I’m not there yet but there is lot’s of progress. One of the cool things of CW is it’s high efficiency due to the high S/N-ratio. Therefor CW makes it possible to work great distances on HF with only very little power.
So no need necessarily for big transceivers for CW. And then suddenly a whole new world of the radio amateur hobby opens up: QRP!

Building kits for QRP CW is versatile and a lot cheaper en less complex to build compared to QRO. And there seems so much creativity and wide range of kits! From the fancy (and expensive) Elecraft K1 to the awesome kits from NorCal QRP club.
I think I’m about ordering a kit and pick up the solder iron to start building again! The fun and satisfaction of working with your own build equipment seems incredibly attractive!
Reporting back on any building here of course.

Posted on
by

You would think it’s a great wedding to hookup a Icom IC-7700 to a Rohde&Schwarz HL451 Log-periodic. Let me tell you, it is! Last weekend we were building up the command center for the yearly Dutch balloon fox hunting and it happens to be there was a Icom IC-7700 lingering around. We decided to find out how the Rohde&Schwarz HL451 Log periodic would sound, so we hooked it up. I was listening to a USA-station in Michigan who sounds like we’re on telephone.

Posted on
by

BuddiPole test runMy birthday present of this year was getting a bit dusty. So after a days work this afternoon I decide to put it in the air for a test run. A few days ago I bought some nice mast pieces of 1m20 each. So I attached the BuddiPole to one of the mast pieces and build 6 of the pieces (the BuddiPole itself around 16 meters up in the air). It was kind of scary standing on the roof, holding the growing mast with two hands in the (little) wind. But it worked! I attached the temporary mast to my other 2m/70cm mast with some tie-wraps. There was virtually no wind, so not much could go wrong.

Back in the shack I did immediately notice the low noise level and strong signals. Of course it’s high altitude is also responsible for that (less QRM) but the SWR is flat on all of the 15 meter band! Thus it’s design and construction is quite nice. In less then an hour I worked 5 new DXCC-entities (countries) on 15 meter: Bahrain, China, Armenia, Azerbaijan and Cuba!
I think we can safely say the BuddiPole is working nice! Next time I’m putting it up in open field.